Chapter 01 — The Fundamental Group and Some of Its Applications
Proofs omitted. Hover over highlighted terms to see their Lean types.
1.1 — What Is Algebraic Topology?
Definition 1.1.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.1.1: a topological space is a type equipped with a collection of open subsets containing the whole space and closed under finite intersections and arbitrary unions; metric spaces are guiding examples via the topology generated by epsilon-neighborhoods.
universe u
recall TopologicalSpace (X : Type u) : Type uDefinition 1.1.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.1.2: a map p : X → Y is continuous when the inverse image of every open set in Y is open in X; for metric spaces this agrees with the usual epsilon-delta formulation.
universe u v
recall Continuous {X : Type u} {Y : Type v} [TopologicalSpace X] [TopologicalSpace Y]
(p : X → Y) : PropDefinition 1.1.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.1.3: an algebraic-topological invariant with values in a category C is modeled by a functor from topological spaces to C, sending each space X to an object A(X) and each continuous map p : X ⟶ Y to the induced morphism A(p) = p_*.
universe u v
open CategoryTheory
variable (C : Type u) [Category.{v} C]
#check TopCat ⥤ CDefinition 1.1.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.1.4: a homotopy between continuous maps p q : C(X, Y) is a continuous map I × X → Y whose values at the endpoints 0 and 1 recover p and q; this is equivalent to the textbook X × I → Y formulation by swapping the factors.
universe u v
variable {X : Type u} {Y : Type v} [TopologicalSpace X] [TopologicalSpace Y]
recall ContinuousMap.Homotopy (p q : C(X, Y)) : Type (max u v)Principle 1.1.5
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Principle 1.1.5: the usual strict form of the invariance principle says that an algebraic-topological invariant is homotopy invariant when homotopic maps induce the same morphism on the associated algebraic data.
universe u v
open CategoryTheory
namespace CategoryTheory.Functor
variable {C : Type u} [Category.{v} C]
class IsHomotopyInvariant (A : TopCat ⥤ C) : Prop where
/-- A homotopy-invariant algebraic-topological invariant sends homotopic maps to the same
induced morphism. -/
map_eq {X Y : TopCat} {p q : X ⟶ Y} (H : TopCat.Homotopy p q) : A.map p = A.map qMethod 1.1.6
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Method 1.1.6: the basic algebraic-topological method formalized in this chapter uses homotopy invariance as its canonical core, then combines that with explicit computations on standard spaces and maps and with deformation arguments reducing the target problem to those computations. The formal owner for the homotopy-invariance step is CategoryTheory.Functor.map_eq_of_homotopy.
universe u v
open CategoryTheory
variable {C : Type u} [Category.{v} C]
namespace CategoryTheory.Functor
recall map_eq_of_homotopy
{A : TopCat ⥤ C} [A.IsHomotopyInvariant] {X Y : TopCat} {p q : X ⟶ Y}
(H : TopCat.Homotopy p q) :
A.map p = A.map qProgram 1.1.7
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Program 1.1.7: the chapter program centers on the construction of the fundamental group π₁(X, x), the computation π₁(S¹, 1) = ℤ, and the applications to Brouwer fixed point and the fundamental theorem of algebra. The canonical owner for the construction is FundamentalGroup.
universe u
open Metric
open scoped ContinuousMap
recall FundamentalGroup (X : Type u) [TopologicalSpace X] (x : X) : Type u1.2 — The Fundamental Group
Definition 1.2.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.2.1: Two paths from x to y are equivalent when they are homotopic through paths from x to y, so the endpoints remain fixed throughout the homotopy.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
recall Path.Homotopic (f g : Path x y) : PropDefinition 1.2.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.2.2: a loop at x is a path from x to itself, namely an element of Path x x.
universe u
variable {X : Type u} [TopologicalSpace X] {x : X}
#check (Path x x)Definition 1.2.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.2.3: for paths f : Path x y and g : Path y z, the composite Path.trans f g traverses f on the first half of I and g on the second half, each at double speed.
universe u
variable {X : Type u} [TopologicalSpace X] {x y z : X}
recall Path.trans (f : Path x y) (g : Path y z) : Path x zDefinition 1.2.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.2.4: the reverse of a path f : Path x y is Path.symm f, corresponding to the parametrization s ↦ f (1 - s), and the constant loop at x is Path.refl x.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
recall Path.symm (f : Path x y) : Path y xLemma 1.2.5
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.2.5: path composition is well defined on endpoint-fixed homotopy classes. For f : Path x y and g : Path y z, the class of the concatenated path f.trans g depends only on the classes of f and g, so [g][f] = [g · f].
universe u
open Path.Homotopic.Quotient
variable {X : Type u} [TopologicalSpace X] {x y z : X}
recall mk_trans (f : Path x y) (g : Path y z) :
mk (f.trans g) = (mk f).trans (mk g)Lemma 1.2.6
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.2.6: composition of path classes is associative; for endpoint-fixed homotopy classes represented by composable paths f, g, and h, the classes of h · (g · f) and (h · g) · f coincide.
universe u
open Path.Homotopic.Quotient
variable {X : Type u} [TopologicalSpace X] {w x y z : X}
recall trans_assoc (f : Path.Homotopic.Quotient w x) (g : Path.Homotopic.Quotient x y)
(h : Path.Homotopic.Quotient y z) :
trans (trans f g) h = trans f (trans g h)Lemma 1.2.7
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.2.7 (1): constant paths are right units up to endpoint-fixed homotopy, so for a path f : Path x y, the class of f.trans (Path.refl y) equals the class of f.
universe u
open Path.Homotopic.Quotient
variable {X : Type u} [TopologicalSpace X] {x y : X}
recall trans_refl (γ : Path.Homotopic.Quotient x y) :
trans γ (refl y) = γLemma 1.2.8
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.2.8 (1): a path class followed by its reverse is endpoint-fixed homotopic to the constant path at the starting point, so for γ : Path.Homotopic.Quotient x y, γ.trans γ.symm = refl x.
universe u
open Path.Homotopic.Quotient
variable {X : Type u} [TopologicalSpace X] {x y : X}
recall trans_symm (γ : Path.Homotopic.Quotient x y) :
γ.trans γ.symm = refl xTheorem 1.2.9
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Theorem 1.2.9: π₁(X, x) = Path.Homotopic.Quotient x x carries the group structure induced by path composition, with unit the constant loop class and inverse given by path reversal.
universe u
open Path.Homotopic.Quotient
variable {X : Type u} [TopologicalSpace X] {x : X}
instance loop_homotopy_group (x : X) : Group (Path.Homotopic.Quotient x x)Remark 1.2.10
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Remark 1.2.10: later homotopy groups are organized into the family π_ n X x; the fundamental group is the first member of this family, so π_ 1 X x is canonically identified with FundamentalGroup X x.
universe u
open scoped Topology
variable {X : Type u} [TopologicalSpace X] (x : X)
recall HomotopyGroup.pi1EquivFundamentalGroup : π_ 1 X x ≃ FundamentalGroup X x1.3 — Dependence on the Basepoint
Definition 1.3.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.3.1: for a path a : Path x y, the basepoint-change map γ[a] : π₁(X, x) → π₁(X, y) is the canonical equivalence FundamentalGroup.fundamentalGroupMulEquivOfPath a, acting by conjugation with a.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
open FundamentalGroup
open Path.Homotopic.Quotient
open scoped FundamentalGroup
recall FundamentalGroup.fundamentalGroupMulEquivOfPath (a : Path x y) :
FundamentalGroup X x ≃* FundamentalGroup X yLemma 1.3.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.3.2 (1): the basepoint-change equivalence associated to a path a : Path x y depends only on the endpoint-fixed homotopy class of a.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
open CategoryTheory FundamentalGroup
open Path.Homotopic.Quotient
open scoped FundamentalGroup
lemma fundamentalGroupMulEquivOfPath_homotopic_eq {a b : Path x y} (h : a.Homotopic b) :
γ[a] = γ[b]Lemma 1.3.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.3.3: basepoint change along a composite path is the composite of the corresponding basepoint-change equivalences, so γ[b · a] = γ[b] ∘ γ[a].
universe u
variable {X : Type u} [TopologicalSpace X] {x y z : X}
open CategoryTheory
open scoped FundamentalGroup
theorem fundamentalGroupMulEquivOfPath_trans (a : Path x y) (b : Path y z) :
γ[a.trans b] = (γ[a]).trans (γ[b])Proposition 1.3.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Proposition 1.3.4: the inverse of the basepoint-change equivalence associated to a path a : Path x y is the basepoint-change equivalence associated to the reversed path a.symm.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
open CategoryTheory
open scoped FundamentalGroup
theorem fundamentalGroupMulEquivOfPath_symm (a : Path x y) :
(γ[a]).symm = γ[a.symm]Lemma 1.3.5
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.3.5: if the fundamental group π₁(X, x) is Abelian, then the basepoint-change isomorphism γ[a] : π₁(X, x) → π₁(X, y) is independent of the chosen path class from x to y.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
open CategoryTheory FundamentalGroup
open scoped FundamentalGroup
theorem fundamentalGroupMulEquivOfPath_eq_of_abelian
[Std.Commutative ((· * ·) : FundamentalGroup X x → FundamentalGroup X x → FundamentalGroup X x)]
(a b : Path x y) :
γ[a] = γ[b]Remark 1.3.6
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Remark 1.3.6: when π₁(X, x) is Abelian, all basepoints in the same path component are canonically identified at the level of the fundamental group, since the basepoint-change equivalence attached to Joined x y agrees with the one induced by any path from x to y.
universe u
variable {X : Type u} [TopologicalSpace X] {x y : X}
open scoped FundamentalGroup
theorem fundamentalGroupMulEquivOfJoined_eq_of_path
[Std.Commutative ((· * ·) : FundamentalGroup X x → FundamentalGroup X x → FundamentalGroup X x)]
(h : Joined x y) (a : Path x y) :
γ[h.somePath] = γ[a]1.4 — Homotopy Invariance
Definition 1.4.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.4.1: a continuous map p : X → Y induces a map on loop classes, hence on π₁(X, x) = Path.Homotopic.Quotient x x, by sending the class [f] to the class [p ∘ f].
universe u v
open Path.Homotopic.Quotient
variable {X : Type u} {Y : Type v} [TopologicalSpace X] [TopologicalSpace Y]
variable {x₀ x₁ : X}
recall map (γ : Path.Homotopic.Quotient x₀ x₁) (f : C(X, Y)) :
Path.Homotopic.Quotient (f x₀) (f x₁)Lemma 1.4.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.4.2 (1): the map on fundamental groups induced by the identity map is the identity homomorphism.
universe u v w
open scoped ContinuousMap
variable {X : Type u} [TopologicalSpace X]
variable {Y : Type v} [TopologicalSpace Y]
variable {Z : Type w} [TopologicalSpace Z]
theorem fundamental_group_map_id (x : X) :
FundamentalGroup.map (.id X) x = MonoidHom.id (FundamentalGroup X x)Definition 1.4.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.4.3: for a homotopy H : p.Homotopy q and a basepoint x : X, the basepoint track is the path H.evalAt x : Path (p x) (q x) obtained by following the point x through the homotopy, namely t ↦ H (t, x).
universe u v
variable {X : Type u} {Y : Type v} [TopologicalSpace X] [TopologicalSpace Y]
recall ContinuousMap.Homotopy.evalAt {p q : C(X, Y)} (H : p.Homotopy q) (x : X) :
Path (p x) (q x)Proposition 1.4.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Proposition 1.4.4: if H : p.Homotopy q, then the induced maps on fundamental groups commute with basepoint change along the track H.evalAt x, so γ[H.evalAt x] ∘ p_* = q_*.
universe u v
open CategoryTheory FundamentalGroupoidFunctor
open scoped ContinuousMap
open scoped FundamentalGroup
variable {X : Type u} [TopologicalSpace X]
variable {Y : Type v} [TopologicalSpace Y]
theorem fundamental_group_map_homotopy_commutes (p q : C(X, Y)) (H : p.Homotopy q) (x : X) :
((γ[H.evalAt x]).toMonoidHom.comp (FundamentalGroup.map p x)) =
FundamentalGroup.map q x1.5 — Calculations: π₁(ℝ) = 0 and π₁(S¹) = ℤ
Lemma 1.5.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.1: the fundamental group of ℝ based at 0 is trivial.
theorem fundamental_group_real_zero_subsingleton :
Subsingleton (FundamentalGroup ℝ 0)Definition 1.5.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.5.2: the circle S^1 is the unit circle in ℂ, represented in mathlib by Circle; it is used with its multiplicative topological group structure and with chosen basepoint 1.
recall Circle : TypeConstruction 1.5.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Construction 1.5.3: for each integer n, the standard loop on S^1 based at 1 is the path s ↦ e^{2πins}, represented in mathlib by s ↦ Circle.exp (2 * π * n * s).
def standardLoop (n : ℤ) : Path (1 : Circle) 1 :=
Path.ofLine (standardLoop_continuousOn n) (standardLoop_zero n) (standardLoop_one n)Lemma 1.5.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.4: the standard loop classes multiply by adding winding numbers, so [f_m] [f_n] = [f_{m+n}] in π₁(S¹, 1).
open FundamentalGroup
theorem standardLoopClass_add (m n : ℤ) :
standardLoopClass m * standardLoopClass n = standardLoopClass (m + n)Construction 1.5.5
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Construction 1.5.5: the standard loop f_n factors through the canonical covering map Real.fourierChar : ℝ → S¹ by the lift \tilde f_n(s) = ns.
theorem standardLoop_factors_through_fourierChar (n : ℤ) (s : Set.Icc (0 : ℝ) 1) :
standardLoop n s = Real.fourierChar (standardLoopLift n s)Lemma 1.5.6
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.6: every path in S^1 starting at 1 has a unique lift to ℝ starting at 0 through the covering map Real.fourierChar x = e^{2πix}.
open scoped unitInterval
theorem existsUnique_fourierChar_lift_of_circle_path {y : Circle} (f : Path (1 : Circle) y) :
∃! g : C(I, ℝ), (Real.fourierChar ∘ g : I → Circle) = f ∧ g 0 = 0Lemma 1.5.7
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.7: homotopic loops in S¹ based at 1 have canonical lifts through Real.fourierChar : ℝ → S¹ starting at 0, and these lifts end at the same point of ℝ.
open scoped unitInterval
theorem fourierChar_lift_endpoint_eq_of_homotopic_loops
(γ₀ γ₁ : Path (1 : Circle) 1) (h : γ₀.Homotopic γ₁) :
real_fourierChar_isCoveringMap.liftPath γ₀.toContinuousMap 0
(circle_path_start_eq_fourierChar_zero γ₀) 1 =
real_fourierChar_isCoveringMap.liftPath γ₁.toContinuousMap 0
(circle_path_start_eq_fourierChar_zero γ₁) 1Definition 1.5.8
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.5.8: the map j : π₁(S^1, 1) → ℤ sends a loop class to the integer endpoint of the unique lift through Real.fourierChar : ℝ → S¹ starting at 0.
open scoped unitInterval
def circleFundamentalGroupLiftIndex
(γ : FundamentalGroup Circle (1 : Circle)) : ℤ :=
Int.floor (circleFundamentalGroupLiftEndpoint γ : ℝ)Lemma 1.5.9
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.9: the lift-index map j is well defined on loop classes in π₁(S¹, 1), and on the standard loop f_n it returns the integer n.
open FundamentalGroup
open scoped unitInterval
theorem circleFundamentalGroupLiftIndex_standardLoop (n : ℤ) :
circleFundamentalGroupLiftIndex (standardLoopClass n) = nLemma 1.5.10
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.5.10: the lift-index map j : π₁(S¹, 1) → ℤ, represented by circleFundamentalGroupLiftIndex, is injective.
open Path.Homotopic.Quotient
theorem circleFundamentalGroupLiftIndex_injective :
Function.Injective circleFundamentalGroupLiftIndexTheorem 1.5.11
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Theorem 1.5.11: the canonical infinite-cyclic owner intEquivOfZPowersEqTop specializes the generator theorem above to identify π₁(S¹, 1) with Multiplicative ℤ.
open FundamentalGroup
#check
(intEquivOfZPowersEqTop (standardLoopClass 1) standardLoopClass_one_zpowers_eq_top :
Multiplicative ℤ ≃* FundamentalGroup Circle (1 : Circle))1.6 — The Brouwer Fixed Point Theorem
Lemma 1.6.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.6.1: the fundamental group of the closed unit disk D² is trivial at any basepoint.
open Metric
local notation "D²" => closedBall (0 : ℂ) 1
theorem fundamental_group_closed_unit_disk_subsingleton (x : D²) :
Subsingleton (FundamentalGroup D² x)Proposition 1.6.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Proposition 1.6.2: there is no continuous retraction from the closed unit disk D² onto its boundary circle S¹; equivalently, no continuous map r : D² → S¹ restricts to the identity on the boundary inclusion S¹ ↪ D².
open Metric
open scoped ContinuousMap
local notation "D²" => closedBall (0 : ℂ) 1
theorem no_continuous_retraction_closed_unit_disk_to_circle :
¬ ∃ r : C(D², Circle), r.comp circleToClosedUnitDisk = ContinuousMap.id CircleConstruction 1.6.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Construction 1.6.3: a fixed-point-free self-map of the closed unit disk D² determines a continuous map to the boundary circle S¹ by sending x to the intersection of S¹ with the ray starting at f x and passing through x.
open Complex Metric
open scoped ContinuousMap
local notation "D²" => closedBall (0 : ℂ) 1
variable (f : C(D², D²)) (hf : ∀ x : D², f x ≠ x)
def fixedPointFreeDiskRetraction : C(D², Circle)Theorem 1.6.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Theorem 1.6.4: every continuous self-map of the closed unit disk D² has a fixed point.
open Metric
open scoped ContinuousMap
local notation "D²" => closedBall (0 : ℂ) 1
theorem brouwer_fixed_point_closed_unit_disk
(f : C(D², D²)) :
∃ x : D², Function.IsFixedPt f x1.7 — The Fundamental Theorem of Algebra
Definition 1.7.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Definition 1.7.1: the degree of a self-map f : S¹ → S¹ is the integer by which the induced map on π₁(S¹) sends the chosen generator standardLoopClass 1 after transporting the basepoint from f 1 back to 1.
open scoped ContinuousMap
open scoped FundamentalGroup
def circleDegree (f : C(Circle, Circle)) : ℤ :=
circleFundamentalGroupLiftIndex <|
γ[PathConnectedSpace.somePath (f 1) (1 : Circle)]
(FundamentalGroup.map f (1 : Circle) (standardLoopClass 1))Lemma 1.7.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.7.2: the degree of a self-map of S¹ is unchanged under homotopy through maps S¹ → S¹.
open scoped ContinuousMap CircleDegree FundamentalGroup
theorem circleDegree_eq_of_homotopic
(f g : C(Circle, Circle)) (h : f.Homotopic g) :
deg(f) = deg(g)Lemma 1.7.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Lemma 1.7.3 (1): every constant self-map of S¹ has degree 0.
open scoped ContinuousMap CircleDegree FundamentalGroup
theorem circleDegree_const (z : Circle) :
deg(ContinuousMap.const Circle z) = 0Theorem 1.7.4
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Theorem 1.7.4 (1): the fundamental theorem of algebra says that every nonconstant complex polynomial has a complex root; this is the canonical mathlib theorem Complex.exists_root, which covers the textbook's monic normal form x^n + c_1 x^(n - 1) + ... + c_n with n > 0.
recall Complex.exists_root {f : Polynomial ℂ} (hf : 0 < f.degree) :
∃ z, f.IsRoot zProof Step 1.7.5
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
ProofStep 1.7.5: the textbook factorization step f = (X - C c) * g ⟹ roots.card f = natDegree f does not define a new owner theorem in the project. Its mathematical content is already covered by the canonical algebraically closed field root-count theorem specialized to ℂ; the linear-factor lemmas roots_mul, roots_X_sub_C, natDegree_mul, and natDegree_X_sub_C belong to the derived proof API rather than the public statement surface.
#check (IsAlgClosed.card_roots_eq_natDegree : ∀ {p : Polynomial ℂ}, p.roots.card = p.natDegree)Proof Step 1.7.6
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
The normalization z / ‖z‖ of a nonzero complex number has norm 1.
open Metric
open scoped ContinuousMap CircleDegree unitInterval
local notation "D²" => closedBall (0 : ℂ) 1
theorem complexDivNormCircle_norm_eq_one (z : ℂ) (hz : z ≠ 0) :
‖z / ‖z‖‖ = 1Proof Step 1.7.7
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
A polynomial with no zeros for ‖z‖ ≥ 1 is nonzero on the unit circle.
open scoped ContinuousMap CircleDegree unitInterval BigOperators
variable (f : Polynomial ℂ)
variable (hf : ∀ z : ℂ, 1 ≤ ‖z‖ → Polynomial.eval z f ≠ 0)
theorem polynomial_eval_ne_zero_on_circle_of_no_root_outside_open_unit_disk
(hf : ∀ z : ℂ, 1 ≤ ‖z‖ → Polynomial.eval z f ≠ 0)
(z : Circle) :
Polynomial.eval (z : ℂ) f ≠ 0Problems
Problem 1.8.1
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Problem 1.8.1: if a complex polynomial has no root on S¹, then the number of its roots in the open unit disk, counted with multiplicity, equals the degree of the normalized boundary map z ↦ p(z) / |p(z)|.
open scoped ContinuousMap CircleDegree
theorem circleDegree_polynomialNormalizedBoundaryMap_eq_card_roots_inside_open_unit_disk
(p : Polynomial ℂ)
(hp : ∀ z : Circle, p.eval (z : ℂ) ≠ 0) :
deg(polynomialNormalizedBoundaryMap p hp) =
((p.roots.filter fun z ↦ ‖z‖ < 1).card : ℤ)Problem 1.8.2
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Problem 1.8.2: any continuous self-map of S¹ whose degree is not 1 has a fixed point.
open scoped ContinuousMap CircleDegree unitInterval
open FundamentalGroup
theorem circle_exists_fixed_point_of_degree_ne_one
(f : C(Circle, Circle)) (hf : deg(f) ≠ 1) :
∃ z : Circle, Function.IsFixedPt f zProblem 1.8.3
Lean contributors (project-level attribution): Ze Yuan, Zichen Wang.
Problem 1.8.3: multiplication on the fundamental group at the unit of an HSpace is commutative. In particular, the fundamental group at the identity of a topological group is commutative via IsTopologicalGroup.hSpace.
universe u
open Path.Homotopic.Quotient
open scoped unitInterval
variable {X : Type u} [TopologicalSpace X] [HSpace X]
theorem fundamentalGroup_mul_comm (a b : FundamentalGroup X HSpace.e) :
a * b = b * a